TrueDEK Linear Shower Base – 47 ¼” x 47 ¼”

Regular Price $853.00

SKU: 21208

+ Structural materials able to support up to 560lbs max.
+ Pre-sloped with 4 gradient planes for quick drainage
+ Choice of stylish linear stainless-steel drain covers
+ Create a zero-entry shower without modifying joists
+ Beautifully finish with ceramic tile or natural stone

121 853


TrueDEK Linear shower bases feature a fully integrated drain gulley molded directly into a structural, pre-pitched base that can support a maximum capacity of 560lbs and can be beautifully finished with ceramic tile or natural stone.

Precisely sloped to ensure quick, accurate drainage, TrueDEK Linear can be installed directly onto joists to create a curbless shower flush with the bathroom floor, making them wheelchair and disability friendly, as well as easier to clean and safer to use for the whole family, for years to come.

Product Specification:

  • 560lbs max. capacity when installed on 16″ o.c. joist systems
  • Approx weight: 55lbs
  • Install on wooden joists (no need to notch, lower or alter joists), sub-floor, or concrete
  • Cannot be cut or trimmed due to the internal structure of the base
  • Extend length of pitch to comply with ADA regulations using TruePITCH Extension panels
  • 4 pre-sloped gradient planes direct water flow towards drain
  • 2% per foot or greater gradient
  • Integrated drain gulley with up to 3 locations for you to connect to the drain line
  • During installation, ensure the drain gulley hangs between joists for clear access to drain line
  • 7/8″ thick around perimeter
  • 1¾” wide leveling rim around perimeter with pre-bored, countersunk pilot holes
  • Finish with tile or stone (between ¼”-1″ thick)
  • For tile that is 2″ x 2″ or smaller, conform to the pitched contours of the base; for tile larger than 2″ x 2″, make valley cuts so the tile lays properly on all pre-pitched surfaces
  • Covered by AKW limited lifetime warranty
  • You will need an ARC Waterproofing Kit and TrueDEK Linear Drain Cover
  • For more details, see Specification Sheet
  • Review installation instructions before beginning your project

Specification Sheets

Download Specification Sheet

What you will need

  • TrueDEK Linear foundation
  • drain assembly
  • 2″ drain connector
  • waterproofing kit (additional waterproofing supplies may be required depending on the size and complexity of the project)
  • circular saw
  • flush cutting saw or reciprocating saw
  • power drill
  • belt sander or orbital sander
  • caulking gun
  • 3¼” hole saw with mandrel
  • hammer
  • pry bar
  • speed square
  • scissors or utility knife
  • 3″ or 4″ paint brush (throw away type)
  • paint roller and cover
  • 2× lumber for blocking
  • polyurethane construction adhesive (four to five 10 oz. tubes)–use a product that bonds to plastic and wood
  • acrylic paintable caulk (one 10 oz. tube)
  • #9 x 2″ ceramic coated or stainless steel flathead screws

There are no video tutorials for this product.

There are no FAQs for this product.

Find your nearest ARC distributor

Find ARC bathroom products at 170+ distributors located across the United States & Canada, including a range of national chains and independent merchants.

Learn more

©2023 ARC Inc. All Rights Reserved | Website by Super Digital